To choose an MG key cover, take off any old sleeve, hold the fob with the keyring end down and look for the boot icon. If pressing a round release button makes a metal blade swing out, start with a flip-key cover. If your key has no swing-out blade, compare the outline and the position of the boot button with the smart-key photos. The Hector, Astor and ZS EV all appear on “3-button” listings. The blade and boot icon give you two better clues to start with.
Start in the SHOPOFLUX MG key-cover collection, then open the design that matches the key you actually carry.
MG Hector: where does the blade go?
On the Hector flip key pictured below, the round blade release sits above the row of three remote buttons. With the blade folded away, you can see where it sits along the side of the fob. The cover needs clearance at both the release and the blade edge. Check the shape of the metal loop at the bottom while you have the key in hand.

If that matches, compare the other angles on the Hector 3-button flip-key cover listing. If your Hector has a smart fob, open the black metal Hector smart-key cover listing and check whether the boot symbol sits closest to the keyring end, as it does in this example.

Astor and ZS EV: look at the middle button
On the key pictured in the Astor and ZS EV 3-button smart-key cover listing, the boot icon sits between the two padlock icons. The button panel also narrows into the curved metal keyring end. Compare both details. If your boot icon sits at the bottom, go back to the MG collection and open another design.

The Hector and Windsor EV smart-key listing shows one more useful example. Its key photo has a boot icon at the bottom and a broader, squarer keyring end. Compare the corners and the shape around the loop as well as the buttons. Those details help when a second listing also has the boot icon at the bottom.

Questions you may have before ordering
My smart key has a hidden metal key. Which cover should I look at?
Check how the metal key comes out. A flip blade pivots out from the side. An emergency key may slide out when you move a small latch. For a smart fob with a removable blade, compare the latch position and the release path with the listing photos. MG’s owner’s manual selector can help you find the instructions for your car.
Can I use the same cover on my main key and my spare?
Put both keys next to each other before ordering a pair. If they have the same body outline, button layout and openings, compare them with the same listing. If the spare has a different shell or blade, check its fit separately.
The buttons line up, but the ring end looks different. Should I order?
Check the listing’s side and rear photos first. If you still cannot tell, take a straight-on photo of the button face and one of the keyring end, then use the fit-support link on the product page. The key-cover fit checklist shows the other details worth capturing.